SATA to Dual-SATA RAID-0 Device Adapter w/ Mounting Kit Features: Converts two 2.5" Solid State Disks or HDD (Laptop) into High Capacity RAID 0 Disk in 3.5" form factor Two 22-Pin (Power Data) on Board Connectors for SSD or HDD One 22-Pin SATA Connector and one 5-Pin Header (USB 2.0) for Host Connection 3Gbps SATA II High-Transfer Rate Easy Hardware RAID Setting using Jumpers Supports NCQ Hot-Plug ATAPI Support Includes Mounting Brackets For 2.5" hard Disk Drive into a 3.5-in. bay RoHS Complian

Designed to adapt a SAS 29 pin, SFF-8482, to SATA. This card has one SAS input, one molex power input and two SATA data outputs. The card is 3.5 inches wide.

3Ware Cable CBL-SFF8087-06M Multi-Lane Internal Serial ATA 0.6m Brand: 3WARE MFG Part#: CBL-SFF8087-06M SKU: 510757 It combines the RAID controllers four SATA ports into a single locked connection. Cable Type - Multi-lane Internal SATA Cable Connector Type - 2x SFF-8087 Compatible Controllers - 9590SE (-8ML, -12ML, -16ML) 9550SX (-12ML, -16ML) I/O Cable Type - SATA Multi-lane SATA cable/connection system is : - Combines the RAID controllers 4 SATA ports into a single locked connection. - Four lanes of 3Gb/s SATA traffic travel through one cable from the RAID controller to the system backplane, or to up to four hard drives with a breakout cable Multi-lane Benefits - Four lanes of high speed SATA traffic through a single cable - Increased system reliability - Reduced cable count -... Less

Designed to adapt a SAS 29 pin, SFF-8482, to SATA. This card has one SAS input, one molex power input and two SATA data outputs. The card is 2.5 inches wide.

3Ware Cable CBL-SFF8087-06M Multi-Lane Internal Serial ATA 0.6m - Kit MFG Part#: CBL-SFF8087-06M SKU: 3089734 Four lanes of 3Gbps SATA traffic travel through just one cable from the RAID controller to the system backplane. Manufacturer Part: CBL-SFF8087-06M Quantity: 1 Cable Type - Multi-lane Internal SATA Cable Connector Type - 2x SFF-8087 Compatible Controllers - 9590SE (-8ML, -12ML, -16ML) 9550SX (-12ML, -16ML) I/O Cable Type - SATA Multi-lane SATA cable/connection system is : - Combines the RAID controllers 4 SATA ports into a single locked connection. - Four lanes of 3Gb/s SATA traffic travel through one cable from the RAID controller to the system backplane, or to up to four hard drives with a breakout cable Multi-lane Benefits - Four lanes of high speed SATA traffic through a... Less

Connection cable between Mainboard and SATA devices. This cable was used to connect 4 different SATA devices such as HDDs or optical drives to the Mainboard. Additionally shielded and insulated, this cable is perfect for use in your PC. The safety latch is an additional safety feature which locks the plug into place to ensure a safe connection. This connection can be loosened by hand by pressing the plug. Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called mesh, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to... Less

LSI, Part #: CBL-SFF8087OCF-10M 3ware Serial Attached SCSI (SAS) Internal Cable - SFF-8087 - SATA - 3.28ft Marketing Information:The Multi-lane SATA cable/connection system is fast, secure, simple, and clutter free. It combines the RAID controller's four SATA ports into a single locked connection. Four lanes of 3Gb/s SATA traffic travel through just one cable from the RAID controller to the system backplane or to up to four hard drives with a breakout cable. Main Specification: Manufacturer LSI

Connection cable between SATA devices and Mainboard/Control ler. This cable can be used to connect a SATA drive such as a HDD or DVD-drive to the Mainboard or SATA Controller. Please make sure that your drive is SATA and not IDE, as the cable is not compatible to IDE devices. The cable is elaborately shielded to make it perfect for use in a PC. One connector is straight, the other angled to allow easy connection. Technical details: Length: 60cm Color: Blue Connectors: 1 x Straight, 1 x Angled Connection type: SATA II

CF to 2.5 Inch SATA Adapter Card with Case Description : This adapter when loaded with 1 Compact Flash Cards can work and operate as a 2.5 Inch Hard Drive. · Fully compatible with Compact Flash Type I, Type II and Microdrive Cards. · Supports DMA and high speed UDMA · This adapter does not support hot insertion of CF cards. · Compatible with DOS, Windows 3.1, NT4, 98SE, Me, 2000, XP, Vista, Mac, Linux Physical size of case : 99 x 69 x 11 mm Package Includes: 1 X CF to 2.5 Inch SATA Adapter Card with Case Micro SATA CableS PN # CF-SATA-CASE

Connection cable between SATA devices and Mainboard/Control ler. This cable can be used to connect a SATA drive such as a HDD or DVD-drive to the Mainboard or SATA Controller. Please make sure that your drive is SATA and not IDE, as the cable is not compatible to IDE devices. The cable is elaborately shielded to make it perfect for use in a PC. One connector is straight, the other angled to allow easy connection. Technical details: Length: 60cm Color: Red Connectors: 1 x Straight, 1 x Angled Connection type: SATA II

Connection cable between SATA devices and Mainboard/Control ler. This cable can be used to connect a SATA drive such as a HDD or DVD-drive to the Mainboard or SATA Controller. Please make sure that your drive is SATA and not IDE, as the cable is not compatible to IDE devices. The cable is elaborately shielded to make it perfect for use in a PC. One connector is straight, the other angled to allow easy connection. Technical details: Length: 60cm Color: Black Connectors: 1 x Straight, 1 x Angled Connection type: SATA II

5 PACK SERIAL ATA SATA 2 RAID DATA HDD HARD DRIVE CABLE W/ LOCKING CLIPS 3 GBPS NEW 5X SATA 2.0 CABLES HI QUALITY CABLES SUPPORTS 3 GBPS, and 1.5 GBPS TRANSFER RATES SATA 2.0 DATA CABLES / 13 INCH IN LENGTH LOCKING CLIPS ON BOTH ENDS BACKWARDS COMPATIBLE WITH SATA 1.5

New SATA Combo Cable from Orico is SATA 7P + 15P to SATA 7P + 15P. This is a very nifty all-in-one cable used to connect to most modern SATA hard drives. The one end has both the power and the data lines in one large connector while the other ends go to the PSU for power and the motherboard for data transfer. The advantage of this connector is it stays in the hard drive more secure without coming off very easily. Features: Easy migration to SATA Connect SATA devices Compatible with both 3.5’’ and 2.5’’ SATA devices Quickly connect Serial ATA hard drives to an Internal power source Specifications: Type: SATA cable (SATA to SATA) Length: 30cm/60cm Connector: Male S ATA 7P + 15P to Female SATA 7P + 15P Color: Black

Serial SATA ATA RAID DATA HDD Hard Drive Cable x4 Click an Image to Enlarge 4PCS Serial SATA ATA Raid Data HDD Hard Drive Cable Data Transfer speed: 1.5Gbps. Narrow cable design to increase airflow in your PC Compatible Device: ATA hard drive, CD-RW, DVD-RW, and other SATA device Connector A:SATA FEMALE Connector B:SATA FEMALE Length: 20inches/0.5m Color: Red Condition:New Qty:4pcs We ship frmo South San Francisco, California LOCATION CARRIER S/H US DOMESTIC (48 Contiguous) - Typical Delivery i

AOC-USAS-L8i Add-on Card SuperMicro 3Gb/s Eight-Port SAS Internal RAID Adapter The Supermicro UIO MegaRAID AOC-USAS-L8i feature 8 internal SAS connectors for high-performance storage connectivity. Using a LSISAS 1068E I/O processor with Fusion-MPT (Message Passing Technology) for optimum RAID performance and a PCI Express host interface for increased bandwidth, these UIO internal RAID adapters deliver an intelligent and robust RAID solution. The AOC-USAS-L8i supports 122 HDD with IT mode (HBA mode). This product is only available through Supermicro. Compliance RoHS RoHS Compliant 6/6 Dimensions 4.376" x 6.6 " (H x L) Key Features LSISAS 1068E SAS controller 8-port (internal), 3Gb/s per port Supports 122 HDD with IT mode (HBA mode-default shipping mode) / Support RAID 0,1 and 1E with IR... Less

New SATA Combo Cable from Orico is SATA 7P + 15P to SATA 7P + 15P. This is a very nifty all-in-one cable used to connect to most modern SATA hard drives. The one end has both the power and the data lines in one large connector while the other ends go to the PSU for power and the motherboard for data transfer. The advantage of this connector is it stays in the hard drive more secure without coming off very easily. Features: Easy migration to SATA Connect SATA devices Compatible with both 3.5’’ and 2.5’’ SATA devices Quickly connect Serial ATA hard drives to an Internal power source Specifications: Type: SATA cable (SATA to SATA) Length: 60cm Connector: Female  SATA 7P + 15P to Female SATA 7P + 15P Color: Black

New SATA Combo Cable from Orico is SATA 7P + 15P to SATA 7P + 15P. This is a very nifty all-in-one cable used to connect to most modern SATA hard drives. The one end has both the power and the data lines in one large connector while the other ends go to the PSU for power and the motherboard for data transfer. The advantage of this connector is it stays in the hard drive more secure without coming off very easily. Features: Easy migration to SATA Connect SATA devices Compatible with both 3.5’’ and 2.5’’ SATA devices Quickly connect Serial ATA hard drives to an Internal power source Specifications: Type: SATA cable (SATA to SATA) Length: 80cm Connector: Male S ATA 7P + 15P to Female SATA 7P + 15P Color: Black

Drive Bay:Guide slots allows for use in most PC Desktop cases - Requires desktop case with (2) empty 5.25" drive bays and becomes (3) 3.25" hot-swappable HDD Subsystem Interface: SATA to SATA; SAS to SAS Alarm: Overheating alarm Cooling System:One 60mm ball bearing fan with air duct for effective air flow including fan failure sensor RAID:Supports RAID 0, 1, 5 functions (RAID card required) Power Connector: Two 4-pin molex PSU connectors Data Connector: Four SATA (I or II)/SAS data ports Dimensions(L x W x H):8.5" x 3.25" x 5.8" Weight: 4 lbs Warranty:2 Year Limited Warranty (1st Year = Parts & Labor covered, 2nd Year = Labor only covered )

Power eSATA E SATA USB 2.0 PCIe Card - HDD Adapter New This eSATA Adapter Port adds external eSATA connectivity to any desktop computer that has an internal SATA port on the motherboard. Simply connect the cable to your internal Serial ATA port plug in the power and then mount the bracket to an available slot on your computer. Provides one Power Esata Transfer speeds up to 3.0Gps with SATA II and backwards compatible to SATA I Batteries: Power cable included Size: Fits

Tripp Lite expands its line of hard drive cables with the introduction of the new line of eSATA (SATA II) cables. This 18" data cable connects any high-speed eSATA drive, PVR/DVR, or SETOP box to an eSATA controller. SATA-II delivers higher data transfer rates (up to 3 Gbps), and the double-shielded cable design is perfect for the new generation of External SATA -II drives. SATA-II drives offer 6 times the transfer rate of USB & Firewire external drives. These cables feature 7-pin female connectors and offer easy installation.

Extension cable between SATA devices and SATA cable. The cable is elaborately shielded to make it perfect for use in a PC. Technical details: Length: 60cm Color: Red Connectors: 1 x Male, 1 x Female Connection type: SATA II

Package includes: 10 x OKGear 36 inchs SATA 3.0 cable, straight to straight, UV blue color Mfr Description UV-Active With Locking Capability 6GB Maximum transfer rate Hot-swap capability Thinner Cable construction compares with ATA Locking latch connector guarantees proper connection to device Locking Latch connector is compatible with non-locking connector Color: Blue Length:36 inchs Payment Policy PayPal is our only Accepted payment method Immediate Payment is required after the Winning Bid I

Designed for the fastest SATA II hard drives in the market this is an excellent cable product that can be used for any SATA driven system. Constructed to meet signal integrity which is insured for all data transfers up to 3Gb per second. This external use Black color SATA II cable includes the locking mechanism required of the SATA II specification! Perfect for external SATA II Hard Drive Enclosures. Features: Quality SATA-300 cabling. Includes metal latch to prevent ends from falling off Premium Heavy duty Black cable Construction Specifications: 3Gbps Max rating 2m length Secure Metal Latching Designed for External SATA II use

3 ft. SATA-II to eSATA 3GBps UV Blue Round Data Cable, I-L Connectors Designed to connect from SATA II host controller to any E-SATA device Specifications: SATA-2 to eSATA Round Cable I to L Connectors Round Cable construction designed to be more flexible than the flat cable construction 3GB Maximum transfer rate Smart Latch connection ensure the cable is properly attached Metal shielding connector provide better EMI protection Length: 3ft RoHS compliant Color: UV Blue CablesOnline Part Number: FIA-703B

SATA II Male to 4 PIN Molex Female Power Adapter This adapter connects to a 15-pin SATA power connector (usually emanating from a power supply) and can be used to power any device that requires a 4-pin Molex connector (like an IDE hard drive or CD-ROM). Brand Information Brand:Generic Model:1200216 Product Type:Retail Item#:120 0216 Product Specifications Connector 1:15-pin SATA power male Connector 2:4-pin Molex female Measurements:2"L x 1 3/8"W x 1/2"H (50 x 34 x 12mm) Check out my other item

Designed for the fastest SATA II hard drives in the market this is an excellent cable product that can be used for any SATA driven system. Constructed to meet signal integrity which is insured for all data transfers up to 3Gb per second. This external use Black color SATA II cable includes the locking mechanism required of the SATA II specification! Perfect for external SATA II Hard Drive Enclosures. Features: Quality SATA-300 cabling. Includes metal latch to prevent ends from falling off Premium Heavy duty Black cable Construction Specifications: 3Gbps Max rating 1m length Secure Metal Latching Designed for External SATA II use

Power eSATA E SATA USB 2.0 PCIe Card - HDD Adapter This is an eSATA/USB external bracket adapter port.This bracket of SATA to eSATA/USB adapter adds external eSATA/USB connectivity to any desktop computer that has an internal SATA port on the motherboard. Simply connect the cable to your internal serial ATA port plug in the power and then mount the bracket to an available slot on your computer. Features / Specifications One eSATA/USB port on the bracket Compliant with serial ATA specification S

The Bryston SP3 is designed to be a superb surround sound processor which delivers outstanding home theatre performance by integrating the latest digital innovations with high precision low noise fully discrete analog audio amplifier stages. With the inclusion of HDMI inputs this brings the SP3 to the next step in the evolution of high performance audio quality and interoperability. Analog Inputs: 2x XLR Balanced Pairs 4x RCA Single Ended Pairs RCA Single Ended (7.1 Surround) 4x RCA Single Ended Pairs (Tape Loop Digital Video Recorder) Digital Inputs: 8x HDMI 2x AES/EBU (XLR) 3x Optical (TOSLINK) 4x SPDIF (RCA) USB 2.0 Analog Outputs: XLR Balanced (7.1 Surround) RCA Single Ended (7.1 Surround Zone 2) ¼” Headphone Jack Digital Outputs: 2x HDMI Optical (TOSLINK) Control Inputs: RS-232... Less

The perfect duo for your EHEIM professional 3e external canister filter. Revolutionary convenience and even more settings options: do it all from the comfort of your PC. Simple and convenient programming, setting and updating of your filter on the PC using the EHEIM Interface and with the free and user-friendly software EHEIM Control Center. It can't be done any more easily!Your direct line to the most modern, innovative and comfortable EHEIM filtration technology.With the USB converter (EHEIM Interface), the EHEIM professionel 3e external filter can be connected to a computer via a USB port. The functions can be easily and conveniently controlled, monitored and updated using the EHEIM ControlCenter program. You can run also run your EHEIM professionel 3e external canister filter wireless... Less

SATA Hard Drive Dock/Station with Memory Card Reader for Gateway computer . SATA Hard Drive Docking Station combo with all in one memory card reader & 2 ports USB 2.0 Hub. You could plug SATA hard drive into this product directly. It could plug CF, SD, XD card and Memory Stick series card.It could also connect 2 USB devices through the 2-port hub for file sharing.This SATA HDD dock allows you to plug any 2.5 or 3.5 inch SATA I and SATA II interfaced hard drive to your computer via USB port. The "One Touch Backup" function is the best solution for users to easily backup data from PC to external hard disk. You can use it to transfer files from card readers or HD to computers, laptop, etc. eSata requires that you have a chipset that can support hotswap (ie Intel ICH9) and that this is... Less