Vesuvio OS CYM 250

Vesuvio OS CYM 250

VESUVIO OS CYM 250 uses an HQI-TS 250W 6000 hour metal halide lamp. With its compact dimensions and ability to be used for a plethora of application, and it can light a surprisingly large area with great "reach" in relation to its small lamp power. Color sequences can be selected from a pre-programmed internal controller, with multiple unit synchronization possible, or controlled by the IP65 CYM dedicated controller or by any DMX512 control system. Other Version: VESUVIO OS CYM 250 HFT (with wireless DMX receiver) LAMP: 250W, 20.000 lm, 5.100K Metal halide lamp HQI-TS 250/D UVS Average rated life 6.000 hours Special base. Ordering code LP1004 STANDARDS: Pressure diecast aluminium body, with an adjustable mounting yoke. Scratch resistant textured polyester grey finish, which protects against UV deterioration and general corrosion. Front tempered glass shock resistant. Certified IP65 weather protection Electrical class: I . Shock resistance: 0,8J. Product in compliance with CEI EN 60598-1 and CEI EN 60598-2-17. OPTICAL GROUP:The optical system utilises an aluminium parabolic reflector and produces a soft edge beam of approximately 40. Additional filters are available for alternative beam adjustments. COLOR CHANGER SYSTEM:CYM color changer system operated by high precision step motors, whereby the mixing of cyan, yellow and magenta dichroic filters can create virtually any desired color. BLACK-OUT:A simulation of a black-out effect is achieved by the simultaneous closing of all dichroic filters, which is controlled from an external DMX controller. CONTROL:Internal controller with a choice of eight pre-programmed colour change sequences, any of which can be easily selected from a rear mounted dip switch control panel. Master/slave option for multi unit synchronization. The dedicated IP65 CYM controller gives full remote programmed control, or any DMX 512 controller can be linked - three channels of DMX per projector.