This is the Helimax 25A Electronic Speed Control for the Axe 400 3D / Helicopters (HMXE0800) (HMXE0801). / / FEATURES: High Efficiency / BEC / Low Weight / Compact Size / Universal receiver connector for use with Futaba, JR, Hitec & / Airtronics / / INCLUDES: One 25A electronic speed control (key #61) with Deans Ultra Male / battery connector and universal receiver connector / / REQUIRES: Connecting to motor and battery / / SPECS: Length: 2.25" (51.15mm) / Width: 1" (25.4mm) / Thickness: .45" (11.43mm) / Motor Wire Lead Length: 3" (76.2mm) 16AWG wire / Battery wire Lead Length: 4" (101.6mm) 16AWG wire including connector / Radio Wire Lead Length:... Less

This is the 3500Kv Brushless Main Drive Motor for the / Heli-Max AXE 400 3D RTF Helicopter (HMXE0800). / / FEATURES: Outrunner Brushless Motor / Preinstalled bullet connectors / / INCLUDES: One 3500Kv Brushless Main Drive Motor / / REQUIRES: Installation in the helicopter / / SPECS: Can Length: 30.5mm (1.2") / Can Diameter: 27.8mm (1.09") / Shaft Length: 15mm (0.59") / Shaft Diameter: 2.3mm (0.09") / / COMMENTS: Pinion gear is not included with the motor

Helimax Axe CP 2.4GHz RTF Heli Ready To Fly Helicopter This is the 2.4GHz radio controlled, electric powered, ready to fly AXE CP Helicopter from Heli-Max. FEATURES: Radio: 5-channel 2.4GHz with dual rates for different skill levels Motor: 380 size Main Blades: with reinforced rotor blade grips for extra durability and better Battery: 11.1V 1050mAh LiPo with Deans Ultra Plug and balancing connectors Battery Charger: Balance capability 110V AC wall charger Canopy: Tail Rotor: Direct drive with N60 motor and anodized heat sink Landing Gear: with training gear INCLUDES: RTF AXE CP Helicopter with 2.4GHz Radio, 380 size Motor, Battery, Charger, Training Gear and Instructions REQUIRES: AA Batteries: Four for transmitter SPECS: Rotor Diameter: 21.5" (546mm) Length: 22" (559mm) Width: 4.3"... Less

These are the Skids for the Heli-Max Axe CP Helicopter. FEATURES: Installs through Skid Supports Constructed of plastic INCLUDES: Two Skids, part #7 for the Heli-Max Axe CP Heli SPECS: Diameter: 2.8" (72mm) Length: 6.3" (160mm) Orignal Helimax Part New In Package

Extra Heavy Duty Cutting Torch, One Piece, Cuts Up To 24 In, Gas Service All, Length 36 In, Head 75 Degrees, Manganese Bronze Head Prevents Head Heat Warping, Reversible Ergonomic Cutting Lever Allows Top Or Bottom Mount Of The Cutting Lever, For High Speed Severe Service Scrap And Demolition Cutting

A Lands' End® tie brings you meticulously crafted details. Things you might think available only in neckwear with far higher prices — like a self-fabric keeper instead of cheaper cloth, bartacking at both ends and a full lining. And while many competitors have gone virtually automated, many of our production steps are still done entirely by hand, just 15 ties an hour. We think the patience and precision of fine craftsmanship pays off for you, in a long-lasting tie that keeps its shape for a smooth, twist-free look every time. Dry clean. Imported.

A Lands' End® tie brings you meticulously crafted details. Things you might think available only in neckwear with far higher prices — like a self-fabric keeper instead of cheaper cloth, bartacking at both ends and a full lining. And while many competitors have gone virtually automated, many of our production steps are still done entirely by hand, just 15 ties an hour. We think the patience and precision of fine craftsmanship pays off for you, in a long-lasting tie that keeps its shape for a smooth, twist-free look every time. Dry clean. Imported.

This is the Horizontal Fin for the Heli-Max AXE 400 3D. FEATURES: Nylon construction White in color INCLUDES: One Horizontal Fin, key #50 SPECS: Length: 46mm (1.8") Width: 2.5mm (0.1") Height: 119mm (4.7") New In Package

This is the Linkage Control Ball Set for the / Heli-Max Axe 400 3D Helicopter - HMXE0800, HMXE0801 / / FEATURES: Aluminum construction / Silver in color / / INCLUDES: Eleven 4.8mm ball links, key #41 / Mounting hardware / / REQUIRES: Installation onto heli

Quite possibly the lightest ice axe in the world, C.A.M.P. USA® Corsa excels at mountaineering, adventure racing and low-angle glacier travel. Built from tough and light 7075-series aluminum for dependable service and minimum weight, Corsa is hardly noticeable when packed. Hot-forged, aluminum head with neutral tip delivers solid bite, and the rear adze adds chopping power. Head shape is comfortable when gripping and plunging. Lithe, hollow aluminum shaft wields easily for superb control; integrated spike with rivet at end stops snow from clogging inside shaft. Not suitable for use on vertical ice or mixed terrain.

The master of ice. The perfect balance of the X-Ice gives it a fantastic swing and solid sticks. The aluminum head has a profiled cut out to cleanly accommodate a leash and a large opening for ice clippers. A dual-density grip with a ledge at the bottom is optimized for climbing with or without a leash - the hole in the spike is designed to accept lanyards.

CAMP Corsa Ice Axe The CAMP Corsa is the lightest ice axe in the world (just 205g)! Aluminum alloy head and shaft with nylon spike plug on 60 and 70cm lengths. Not suitable for ice climbing or rugged mixed terrain. Absolutely perfect for low angle glacier travel, ski mounta ... (more!)

A Lands' End® tie brings you meticulously crafted details. Things you might think available only in neckwear with far higher prices — like a self-fabric keeper instead of cheaper cloth, bartacking at both ends and a full lining. And while many competitors have gone virtually automated, many of our production steps are still done entirely by hand, just 15 ties an hour. We think the patience and precision of fine craftsmanship pays off for you, in a long-lasting tie that keeps its shape for a smooth, twist-free look every time. Dry clean. Imported.

Get a cool and casual look in the Axe flip-flop from Steve Madden. You can wear this with some casual shorts, or go for a bit dressier look with jeans and pants.

Blower, Single Inlet, Belt Drive, Forward Curve, Less Drive Package, Wheel Dia 9 In, Max Inlet Temp 250 Deg F, Height 18 3/4 In, Width 14 7/8 In, Depth 26 1/16 In, Inlet Dia 9 In, Discharge Height 10 3/4 In, Discharge Width 6 1/2 In, Housing Finish Gray Baked-on Polyester Epoxy, Includes Weather Proof Drive Cover

Axe Rise Travel Size Shower Gel. Want to make your morning monumental? The stuff of legends? Axe Rise, the uplifting shower gel with Himalayan minerals and lime extract, stimulates your senses to jump start your mind and body. Axe Rise: Conquer the day! Experience the Axe Effect: The Axe effect may result in, but is not limited to, unrelenting female attention and/or late nights. Made in USA. 1.69 oz travel size bottle. Case pack: 48 bottles.

These are the Canopy Grommets for the Heli-Max AXE 400 3D. / / FEATURES: Rubber construction / Black in color / Part #05 of the exploded view in the manual / / INCLUDES: Two Canopy Grommets / / REQUIRES: Installation on the helicopter

Ski mountaineers and other alpine travelers needed an ultralight mountaineering axe, so Camp USA created the 7.2-ounce Corsa Ice Axe. No, that's not a typo; this thing only weighs 7.2 ounces. The key to this ice axe's low weight is all-aluminum construction. Although the Corsa Ice Axe isn't the tool of choice for steep alpine or ice climbing, the aluminum pick gets the job done well on hard neve snow and during mellow glacier travel. Strap this Camp ice axe to your pack for your next technical ski tour, and it will be ready to provide extra purchase for the sketchy traverse into the couloir.

AXE Excite Travel Pack Messenger Bag.AXE deodorant body spray, deodorant/antiper spirant sticks, shower gel and hair products help guys look, smell and feel their best.Includes:1 - 4 oz (113g) deodorant spray1 - 12 fl. oz (354mL) shower gel1 - 12 fl. oz (355mL) shampoo1 - 2.7 oz (76g) anti-perspirant and deodorant invisible solid1 - detail shower tooltotal net weight 6.7 oz (189g) and 24 fl. oz (709mL)

Camp USA Alpina Axe - in stock now. FEATURES of the Alpina Axe by Camp USA General Mountaineering Rugged T-rated pick and shaft Forged chromoly steel head Ergonomic head design for a comfortable hand grip Asymmetric steel spike plunges smoothly Equipped with the technical Alpina leash Carabiner holes at the head and spike for easy clipping SPECIFICATIONS: Sizes: 50, 57, 65, 73 cm Shaft: T Pick: T Spike: Chromoly Steel Leash: Yes Weight: 470 g / 16.6 oz ALL CLIMBING SALES ARE FINAL.

Now available for the Axe! Includes a custom aluminum grip plate.The NEW Virtue OLED board takes performance and consistency to new heights with a 10million operations/sec. processor. And now Virtue OLED's pro-tested game improving Drill and Training Mode Technology will make you a better player at the same time. All new Patent Pending DT Technology incorporates pro-level training drills into the Virtue board with visual confirmation and feedback through the Organic OLED (pronounced "oh-led") Display.

Socket Head Cap Screw, Head Style Button Head, 18-8 Stainless Steel, Finish Plain, Thread Size 1/2-13, Drive Type Hex Socket, Drive Size 5/16 In, Decimal Equivalent 0.500 In, Thread Type Unc, Thread Style Fully Threaded, Thread Direction Right Hand, Length Under Head 1 In, Thread Length 1 In, Head Height 0.265 In, Head Dia 0.875 In, Class 3a, Rockwell Hardness B96-c33, Min Tensile Strength 100,000 Psi, Meets/exceeds Astm F879/ansi B 18.3, Package Quantity 5

This is a pair of Tail Rotor Shaft Assemblies for the Heli-Max AXE 400 3D. / / FEATURES: Metal construction / / INCLUDES: Two Tail Rotor Shaft Assemblies, key #54 / / REQUIRES: Installation on the helicopter / / SPECS: Length: 41.6mm (1.6") / Shaft Diameter: 3.15mm (0.12")

Black Diamond Venom Axe Compact and light enough to stash and carry when not needed, the new Venom is lighter than the Rage and more technical than the Raven. The Venom is for technical mountaineers who want a swingable ice axe for climbing steeper alpine terrain. Its replaceable Venom Classic Pick sticks and holds in steep ice while offering solid self-arrest function on snow. The curved shaft and dual-density grip penetrate hard snow well, making this "one tool" ice axe extremely functional when climbing iced-up couloirs, steep rime ice or exposed snow traverses. Comes with a Lockdown Leash. CEN-B certified. • Compact and light piolet for technical mountaineers • Replaceable Venom Classic Pick sticks and holds in steep ice • Curved shaft and dual-density grip penetrate hard snow well •... Less

Heli-Max Landing Gear Support Struts AXE 400 3D (2) HMXE7932 Description These are the Landing Gear Supports for the AXE 400 3D Helicopter from Helimax (HMXE0800) (HMXE0801). FEATURES Plastic construction Black in color INCLUDES Two landing gear supports, key #2 Four set screws REQUIRES: Installation onto heli Part HMXE7932 by Heli-Max Item Information All items that we sell are brand new in the original package unless specifically stated in the listing. The image shown is for reference only. It

Socket Head Cap Screw, Head Style Button Head, 18-8 Stainless Steel, Finish Plain, Thread Size 3/8-16, Drive Type Hex Socket, Drive Size 7/32 In, Decimal Equivalent 0.375 In, Thread Type Unc, Thread Style Fully Threaded, Thread Direction Right Hand, Length Under Head 1 1/4 In, Thread Length 1 1/4 In, Head Height 0.199 In, Head Dia 0.656 In, Class 3a, Rockwell Hardness B96-c33, Min Tensile Strength 100,000 Psi, Meets/exceeds Astm F879/ansi B 18.3, Package Quantity 10

These are the Tail Servo Boom Mounts for the Heli-Max AXE 400 3D. / / FEATURES: Nylon construction / Black in color / Part #47 of the exploded view in the manual / / INCLUDES: Two Tail Servo Boom Mounts / / REQUIRES: Installation on the helicopter

These are the Washout Control Arms for the Heli-Max AXE 400 3D. / / FEATURES: Nylon construction / Black in color / Part #42 of the exploded view in the manual / / INCLUDES: Two Washout control arms / Two 2x7.5mm phillips head screws / / REQUIRES: Installation on the helicopter

Socket Head Cap Screw, Head Style Button Head, 18-8 Stainless Steel, Finish Plain, Thread Size 3/8-16, Drive Type Hex Socket, Drive Size 7/32 In, Decimal Equivalent 0.375 In, Thread Type Unc, Thread Style Fully Threaded, Thread Direction Right Hand, Length Under Head 2 In, Thread Length 2 In, Head Height 0.199 In, Head Dia 0.656 In, Class 3a, Rockwell Hardness B96-c33, Min Tensile Strength 100,000 Psi, Meets/exceeds Astm F879/ansi B 18.3, Package Quantity 10

The Canicom 400 by DogTec is a feature packed multi-dog remote training system for controlling up to 2 dogs at a time . The Canicom 400 has a larger working range of over 400 yards. A large LCD screen makes correction control easy even in bright light conditions. The Canicom 400 also has the benefit of a flash impulse button which gives consistency to any impulse. Features 15 different levels of impulse Continuous Impulse Flash Impulse Beeper Function LCD display Magnetic on-off switch Fully Waterproof Collar Limited Lifetime Warranty Owners Manual Is your dog out of control? Is he difficult to train? You are not alone. Many dogs simply do not respond to traditional training methods which is why thousands of owners and professional trainers... Less